Product Detail
Product Tags
Related Video
Feedback (2)
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Biggest Bulldozer , Digging Machine , Fiat Bulldozer , "Quality 1st, Rate least expensive, Provider best" is definitely the spirit of our company. We sincerely welcome you to go to our business and negotiate mutual small business!
Factory directly supply Loading Arm System - HBXG-Wheel Loader XG955T Specifications – HBXG Detail:
OVERALL DIMENSION
| Length(with bucket on ground) |
8100(mm) |
| Width(to outside of wheels) |
2800(mm) |
| Bucket width |
2946(mm) |
| Height(To the top of the cab) |
3450(mm) |
| Wheel base |
3100(mm) |
| Tread |
2200(mm) |
| Min. ground clearance |
450(mm) |
MAIN TECHNICAL SPECIFICATION
| Rated load |
5000(Kg) |
| Operating weight |
16500(1±5%)KG |
| Rated bucket capacity |
3m³ Optional 2.2-4.5 (m³) |
| Max. breakout force |
165kN |
| Max. dump clearance |
3140(mm) |
| Dump reach |
1180(mm) |
| Dump angle at any position |
≥45° |
| Digging depth(with bucket bottom horizontal) |
27(mm) |
| Min. turning radius
|
| (1) Outside of bucket |
6689(mm) |
| (2) Outside of rear wheel |
5970(mm) |
| Pivot angle frame |
38° |
| Oscillating angle of rear axle |
+11° |
| Lifting time of bucket |
≤6.2(sec.) |
| Lowering time of bucket |
≤3.8(sec.) |
| Dumping time |
≤1.8(sec.) |
Traveling speed(Km/h)，2 forward and 1 reverse
| Gear |
1st |
2nd |
| Forward |
11.7 |
40.3 |
| Backward |
15.9 |
|
Diesel engine
| Model |
Weichai Engine WD10G220E23 |
| Type |
Direct injection. Turbocharged. Water cooling |
| Rated output |
162 kW |
| Inter-bore of cylinder/Stroke |
126/130(mm) |
| Total exhaust of cylinder |
9.726(L) |
| Model of starting motor |
KB-24V |
| Power of start motor |
7.5(KW) |
| Voltage of starting motor |
24(V) |
| Rated speed |
2000(r/min) |
| Max. Torque |
>900(N.m) |
| Starting type |
Electric |
| Min. specific fuel consumption |
<220g/Kw.h) |
| Engine specific oil consumption |
0.95-1.77(g/Kw.h) |
| Net weight |
1000(Kg) |
Transmission System
| Hydromedia Transmission
|
| Model |
ZL50B-012 |
| Type |
4-elements.single stage |
| Torque ratio |
4 |
| Cooling type |
Pressure oil circulating |
| Type of transmission case |
power shift, spur gear constant-mesh |
| Gear shift position |
2 Forward and 1 reverse gears |
| Axle and Tire
|
| Type of main reducer |
spiral bevel gear, single stage |
| Gear ratio of main reducer |
4.625 |
| Type of final reducer |
Single stage planetary |
| Gear of ratio of final reducer |
4.929 |
| Gear ratio |
22.795 |
| Max. drawing force |
150kN |
| Size of tire |
23.5-25-16PR |
Working Device Hydraulic System
| Model of oil pump |
JHP2080S |
| System pressure |
18MPa |
| Model of Mutichannel conversion valve |
GDF-32-YL18 |
| (D*L)Dimension of lifting cylinder |
Ф160*90*810(mm) |
| (D*L) Dimension of tilting cylinder |
Ф180*90*563(mm) |
Steering System
| Type |
Middle articulated frame. Full-hydraulic Steering |
| Model of steering pump |
JHP2080S |
| Model of redirector |
TLF1-E1000B+FKB6020 |
| Model of priority valve |
YXL-F250F-N7 |
| System pressure |
16MPa |
| Dimension of steering cylinder |
Ф90*400 (mm) |
Brake System
| Type of traveling brake |
Caliper disc brake |
| Air over oil activate 4 wheel brake |
| Air pressure |
6-7.5(kgf/cm2) |
| Type of parking brake |
Hand brake |
| Flexible shaft control clamp brake |
Oil Capacity
| Fuel(diesel) |
250L |
| Engine lubricating oil |
24L |
| Oil for converter and gear box |
45L |
| Oil for hydraulic system |
180L |
| Oil for driving axles(F/R) |
36L |
| Oil for final reducer |
14L |
| Oil for brake system |
3L |
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Factory directly supply Loading Arm System - HBXG-Wheel Loader XG955T Specifications – HBXG, The product will supply to all over the world, such as: Rotterdam, United Arab emirates, Nigeria, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Albert from Pretoria - 2017.10.23 10:29
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Yannick Vergoz from New Orleans - 2017.03.28 12:22